JUMA PA1000 Linear Amplifier

General discussion

Re: JUMA PA1000 Linear Amplifier

Postby KK3AN » 16 Sep 2014 15:54

Hello Gents,

A very interesting thread. Would there be any drain waveforms at 1.8, 14, 30 and 54MHz also available to see?

vy 73, Dan KK3AN
KK3AN
 
Posts: 1
Joined: 16 Sep 2014 07:01
Location: USA

Re: JUMA PA1000 Linear Amplifier

Postby ok1rp » 27 Jan 2015 09:12

Hello,

is there any news regarding the Juma PA1000 or any update for this project please?

Kiitos teille,
Hei
73 - Petr, OK1RP
ok1rp
 
Posts: 55
Joined: 27 Feb 2012 23:20
Location: Czech Republic

Re: JUMA PA1000 Linear Amplifier

Postby OH7SV » 17 Feb 2015 10:22

Petr and others,

See the update here http://www.jumaradio.com/juma-pa1000

73 Matti OH7SV
User avatar
OH7SV
Moderator
 
Posts: 72
Joined: 11 Nov 2011 07:00
Location: Finland

Re: JUMA PA1000 Linear Amplifier

Postby ok1rp » 24 Oct 2015 22:34

Hi
looks like still unavailable in eshop...
73 - Petr, OK1RP
ok1rp
 
Posts: 55
Joined: 27 Feb 2012 23:20
Location: Czech Republic

Re: JUMA PA1000 Linear Amplifier

Postby ok1rp » 06 Nov 2015 22:22

Hi

is there fully working QSK implemented in Juma PA1000 please?

73 - Petr, OK1RP
ok1rp
 
Posts: 55
Joined: 27 Feb 2012 23:20
Location: Czech Republic

Re: JUMA PA1000 Linear Amplifier

Postby ok1rp » 01 Feb 2016 14:19

...seems that no one knows...

Petr, ok1rp
ok1rp
 
Posts: 55
Joined: 27 Feb 2012 23:20
Location: Czech Republic

Re: JUMA PA1000 Linear Amplifier

Postby OH7SV » 04 Feb 2016 17:51

Hello Petr,

JUMA PA1000 is using quite a fast and quiet mechanical T/R relay with max Operate/Release times of 4ms/6ms. That means you can implement quite a fast QSK but it is recommended to configure TRCVR "TXon" timing so that the relay is closed before transmit.

73 Matti OH7SV
User avatar
OH7SV
Moderator
 
Posts: 72
Joined: 11 Nov 2011 07:00
Location: Finland

Re: JUMA PA1000 Linear Amplifier

Postby ok1rp » 09 Feb 2016 14:32

Hi Matti,

thank you. So is it possible to use it in full and smooth QSK mode operation driven by PTT from Elecraft K3 for example please?

Thanks for reply.

73 - Petr, OK1RP
ok1rp
 
Posts: 55
Joined: 27 Feb 2012 23:20
Location: Czech Republic

Re: JUMA PA1000 Linear Amplifier

Postby LU6PSG » 19 May 2016 20:10

Hello. I have been following this interesting thread, and I have to admit that this amplifier has amazed me.

The output transformer solution is wonderful, 2 transformers with paralelled secondary windings, overcoming the push-pull known problem described by Manfred Mornhinweg (ludens.cl).

However, I have seen a picture of the PA-1000 with a different transformer, one with a single ferrite bead and some sort of flexible copper tape as primary. Which transformer is the PA-1000 using at present , the parallel secondary with 4 ferrite beads or the single bead with copper tape primary winding ?

My personal opinion is that the copper tubing primary winding provides better coupling than a copper tape.

Image

73 DE LU6PSG
LU6PSG
 
Posts: 2
Joined: 19 May 2016 19:53
Location: Argentina

Re: JUMA PA1000 Linear Amplifier

Postby LU6PSG » 30 Jun 2016 18:02

Anyone ?
LU6PSG
 
Posts: 2
Joined: 19 May 2016 19:53
Location: Argentina

PreviousNext

Return to Juma Discussion

Who is online

Users browsing this forum: No registered users and 0 guests

cron