Add line level output to TRX2 Aux connector for Digi modes

General discussion

Add line level output to TRX2 Aux connector for Digi modes

Postby KH2BR » 07 Feb 2012 16:44

I have always enjoyed using Ham Radio Deluxe and DM780. I wanted an easy way to get audio line level output via the TRX2 AUX connector.
I placed one lead of a 0.1uf capacitor at the junction of IC10 pin 5 and capacitor C74 on the main board. A short wire is connected to the other lead of the capacitor.
A two pin shorting bar is soldered to the end of the wire. The jumpers on J5, the AUX selector, are removed and your shorting bar is placed on J5 pins 3 and 4, across the center two pins. [ : I : ] Now, Connect the Aux connector to the Microphone input of your computer.

Now you can enjoy DM780.
73's Robert KH2BR
KH2BR
 
Posts: 32
Joined: 13 Nov 2011 07:01
Location: USA

Return to Juma Discussion

Who is online

Users browsing this forum: No registered users and 16 guests

cron