Hello JUMA users !
I have a Elecraft KX3 and a Juma PA-100D amplifier. When connected KX3 with PC only with a native cable to the ACC1 socket, the transceiver can be easily controlled from a computer via OmniRig. Accordingly, when connecting to the ACC1 socket only with a cable for connecting to an amplifier for automatic band switching, the bands on the amplifier switch automatically follow the transceiver without any problems. But if I connect both cables to the ACC1 jack through a splitter (3.5 mm “male” to 2x3.5 mm ”female”), OmniRig refuses to work (the computer "does not see" the transceiver, the COM-port does not respond). The amplifier in this situation could be made to automatically switch bands only by turning off "polling" in amplifier menu and turning on "Ant ctrl" in the KX3 settings in the "autoinform" menu item. But how to make control from a computer work when connected through a splitter to an ACC1 socket?