TX136/500 v1.12 FST4W bug fixed

General discussion

TX136/500 v1.12 FST4W bug fixed

Postby F4GCB » 28 Dec 2020 09:50

Hello the TX136/500 builders,

This new unofficial version 1.12 cancel and replace the version 1.11 for a FST4W bug fixed :

- no TX shifts initialization at TX startup which results in a simple carrier in transmission
- TX shifts initialization only when speed change

Having no TX500 this software has been validated on TX136.

73, Patrick F4GCB 

Attachments
TX136-500 v1.12 (C-source+HEX load file).zip
FST4W bug fixed
(233.68 KiB) Downloaded 726 times
F4GCB
 
Posts: 48
Joined: 27 Aug 2014 19:03
Location: France

Re: TX136/500 v1.12 FST4W bug fixed

Postby F4GCB » 28 Dec 2020 09:51

Here is the V1.12 manual.

73, Patrick F4GCB
Attachments
TX136-500 v1.12 (instructions).zip
Manual
(299.23 KiB) Downloaded 729 times
F4GCB
 
Posts: 48
Joined: 27 Aug 2014 19:03
Location: France

Re: TX136/500 v1.12 FST4W bug fixed

Postby F4GCB » 28 Dec 2020 09:52

And as usual for our Japanese friends, here is the version 1.12j which limits the RF power according to the portable regulation in Japan.

73, Patrick F4GCB
Attachments
TX136-500 v1.12j (HEX load file).zip
Japonese portable regulation
(97.46 KiB) Downloaded 703 times
F4GCB
 
Posts: 48
Joined: 27 Aug 2014 19:03
Location: France

Re: TX136/500 v1.12 FST4W bug fixed

Postby F6CWA » 05 Jan 2021 15:43

Hello
Thanks for working on the new V1.12
which includes modifying the fst4w-120 mode.
I just tested, all the modes work well, all speed
on the tx136 and the tx500.
A big thank you Patrick.
73 Hubert // f6cwa
F6CWA
 
Posts: 13
Joined: 08 Jan 2013 21:02
Location: France JN24NI

Re: TX136/500 v1.12 FST4W

Postby OK8LEO » 24 Nov 2021 07:19

I am new with Juma but how difficult is it to download this software ? I have the ingeniadsPCbootloader and and the folder Juma -tx500 _v112?
OK8LEO
 
Posts: 15
Joined: 19 Nov 2015 19:27
Location: Czech Republic

Re: TX136/500 v1.12 FST4W bug fixed

Postby F4GCB » 24 Nov 2021 13:00

Hello
You will find the procedure in the attached file.
Have fun with the JUMA TX136/500.
73, Patrick F4GCB
Attachments
JUMA TX136-500 Boot loader.pdf
(185.64 KiB) Downloaded 480 times
F4GCB
 
Posts: 48
Joined: 27 Aug 2014 19:03
Location: France

Re: TX136/500 v1.12 FST4W bug fixed

Postby OK8LEO » 24 Nov 2021 18:51

thank you I will start with it tomorrow
Leo
ok8leo
OK8LEO
 
Posts: 15
Joined: 19 Nov 2015 19:27
Location: Czech Republic

Re: TX136/500 v1.12 FST4W bug fixed

Postby OK8LEO » 01 Dec 2021 13:00

Dear Patrick my compliments what you did with Juma software. I am very much impressed with it. It took a bit time to get it downloaded but that is a windows challenge. Just an idea. Would it be possible in the future to do a kind of digi mode hopping or per cycles power increasing to have as an option?
thanks again

Leo
ok8LEO
OK8LEO
 
Posts: 15
Joined: 19 Nov 2015 19:27
Location: Czech Republic

Re: TX136/500 v1.12 FST4W bug fixed

Postby F4GCB » 02 Dec 2021 15:11

Hello,

Thank you for your feedback Leo.
The next version will answer your request with the improvement of the Script mode which is not really optimal.
By the end of the year I hope.

73, Patrick F4GCB
F4GCB
 
Posts: 48
Joined: 27 Aug 2014 19:03
Location: France

Re: TX136/500 v1.12 FST4W bug fixed

Postby OK8LEO » 03 Dec 2021 06:05

Dear Patrick
thanks for the quick feedback. But take your time
Joy the beautiful wintertime
Leo
Ok8leo
OK8LEO
 
Posts: 15
Joined: 19 Nov 2015 19:27
Location: Czech Republic


Return to Juma Discussion

Who is online

Users browsing this forum: No registered users and 20 guests

cron