Page 1 of 1

TX136/500 v1.12 FST4W bug fixed

PostPosted: 28 Dec 2020 09:50
by F4GCB
Hello the TX136/500 builders,

This new unofficial version 1.12 cancel and replace the version 1.11 for a FST4W bug fixed :

- no TX shifts initialization at TX startup which results in a simple carrier in transmission
- TX shifts initialization only when speed change

Having no TX500 this software has been validated on TX136.

73, Patrick F4GCB 


Re: TX136/500 v1.12 FST4W bug fixed

PostPosted: 28 Dec 2020 09:51
by F4GCB
Here is the V1.12 manual.

73, Patrick F4GCB

Re: TX136/500 v1.12 FST4W bug fixed

PostPosted: 28 Dec 2020 09:52
by F4GCB
And as usual for our Japanese friends, here is the version 1.12j which limits the RF power according to the portable regulation in Japan.

73, Patrick F4GCB

Re: TX136/500 v1.12 FST4W bug fixed

PostPosted: 05 Jan 2021 15:43
by F6CWA
Hello
Thanks for working on the new V1.12
which includes modifying the fst4w-120 mode.
I just tested, all the modes work well, all speed
on the tx136 and the tx500.
A big thank you Patrick.
73 Hubert // f6cwa

Re: TX136/500 v1.12 FST4W

PostPosted: 24 Nov 2021 07:19
by OK8LEO
I am new with Juma but how difficult is it to download this software ? I have the ingeniadsPCbootloader and and the folder Juma -tx500 _v112?

Re: TX136/500 v1.12 FST4W bug fixed

PostPosted: 24 Nov 2021 13:00
by F4GCB
Hello
You will find the procedure in the attached file.
Have fun with the JUMA TX136/500.
73, Patrick F4GCB

Re: TX136/500 v1.12 FST4W bug fixed

PostPosted: 24 Nov 2021 18:51
by OK8LEO
thank you I will start with it tomorrow
Leo
ok8leo

Re: TX136/500 v1.12 FST4W bug fixed

PostPosted: 01 Dec 2021 13:00
by OK8LEO
Dear Patrick my compliments what you did with Juma software. I am very much impressed with it. It took a bit time to get it downloaded but that is a windows challenge. Just an idea. Would it be possible in the future to do a kind of digi mode hopping or per cycles power increasing to have as an option?
thanks again

Leo
ok8LEO

Re: TX136/500 v1.12 FST4W bug fixed

PostPosted: 02 Dec 2021 15:11
by F4GCB
Hello,

Thank you for your feedback Leo.
The next version will answer your request with the improvement of the Script mode which is not really optimal.
By the end of the year I hope.

73, Patrick F4GCB

Re: TX136/500 v1.12 FST4W bug fixed

PostPosted: 03 Dec 2021 06:05
by OK8LEO
Dear Patrick
thanks for the quick feedback. But take your time
Joy the beautiful wintertime
Leo
Ok8leo