JUMA PA1000 with KX3 and PX3

General discussion

JUMA PA1000 with KX3 and PX3

Postby OH7SV » 10 Dec 2019 07:53

Hello KX3 users,

KX3 is a good companion with JUMA PA1000. If you have also a PX3 Panadapter you can get all the three tracking the frequency by connecting this way.

Image
JUMA PA1000 with KX3 and PX3

Note1. Place also PTT cable from KX3 ACC2 connector to PA1000 PTT connector.
Note2. See KX3-PA1000 cable instructions in the user manual found here www.jumaradio.com/juma-pa1000
Note3. Set the same baud rate to all the three devices.

73 Matti OH7SV
User avatar
OH7SV
Moderator
 
Posts: 86
Joined: 11 Nov 2011 07:00
Location: Finland

Re: JUMA PA1000 with KX3 and PX3

Postby NC9O » 30 Oct 2020 02:17

Matti one additional cable is needed In this diagram from the ACC2 socket on the KX3 to the PA1000 for PTT as per the user manual on page 10. I use this setup and it works without any issues and it tracks band changes flawlessly.

Thanks for such a great amplifier,
Skip NC9O
NC9O
 
Posts: 1
Joined: 11 Jul 2019 14:32
Location: USA


Return to Juma Discussion

Who is online

Users browsing this forum: No registered users and 3 guests

cron