TX136/500 V1.09 new modes and features added

General discussion

TX136/500 V1.09 new modes and features added

Postby F4GCB » 05 Sep 2016 14:38

Hello the TX136/500 builders,

This new unofficial version 1.09 gives the following changes :
- WSQ2 mode added http://www.qsl.net/zl1bpu/SOFT/WSQ.htm
- JT9 mode added lien http://physics.princeton.edu/pulsar/k1jt/wsjtx.html
- PTT management modified, serial com RTS signal added
- REMOTE mode added to allow a remote control by external softwares (JASON & WSQ2) in view to perform QSO
- JUMA software interface improved to perform QSO in CW, QRSS, DFCW, JASON, WSQ2 and JT9 modes
- Serial sets and queries redefined
- Extended use of callsign and locator (compound callsign, 6-characters grid , tag in beacon message)
- Specific alarm for unavailable call or locator
- Locator accuracy improved with taking hundredth of minutes in account from GPS
- Some bugs fixed.

Having no TX500 this software has been validated on TX136.
If you update with this version don’t forget that the calibration and configuration values will be reset.

For the ones who will try it, thanks in advance for your feedback.

73, Patrick F4GCB
Attachments
TX136-500 v1.09 (C-source+HEX load file).zip
New modes and features added
(201.81 KiB) Downloaded 426 times
F4GCB
 
Posts: 48
Joined: 27 Aug 2014 19:03
Location: France

TX136/500 V1.09 new modes and features added

Postby F4GCB » 05 Sep 2016 14:39

Here is the V1.09 manual.

73, Patrick F4GCB
Attachments
TX136-500 v1.09 (instructions).zip
Manual
(346.15 KiB) Downloaded 437 times
F4GCB
 
Posts: 48
Joined: 27 Aug 2014 19:03
Location: France

TX136/500 V1.09 new modes and features added

Postby F4GCB » 05 Sep 2016 14:40

And as usual for our Japanese friends, here is the version 1.09j which limits the RF power according to the portable regulation in Japan.

73, Patrick F4GCB
Attachments
TX136-500 v1.09j (HEX load file).zip
Japonese portable regulation
(95.87 KiB) Downloaded 400 times
F4GCB
 
Posts: 48
Joined: 27 Aug 2014 19:03
Location: France

Re: TX136/500 V1.09 new modes and features added

Postby JH1GVY » 08 Sep 2016 07:47

V1.09 began working on the TX500. I will report if noticed in something about V1.09.
JH1GVY
 
Posts: 27
Joined: 22 Jan 2014 20:29
Location: Japan


Return to Juma Discussion

Who is online

Users browsing this forum: No registered users and 17 guests