PA100-D with an Elecraft KX3
Posted: 20 Aug 2012 20:45
I have been having lots of success running the Juma linear (PA100-D) with my KX3. I have noticed one problem. On 17 meters and above when using the Auto Frequincy detection, I find on occasion the band readout on the linear flickers to another band during transmittion. An example is when I am on 15 meters sometimes the band indicator on the linear will breafly flicker to the 17 meter readout then return to the 15 meter band. Sometimes when this happens I will get an over current error. It doesn't matter if I am using the antenna or dummy load. If I reduce power to 50 watts out no problem. Running the linear in manual mode also has no problem no matter what power I run and no flickering of the band indicator during transmittion. Any ideas??