JUMA Amateur Radio Forum

Hello Mori, In WSPR 2 and 15, there is the possibility of special message formats which allows to send compound callsigns and 6-digits locators. But its use is restrictive because it requires 2 transmission cycles. That is why I did not add this WSPR extended mode. Fore more information, I return yo...

Hello Geir,

Just to answer your question.
The script can be looped continuously or n times (1 to 99) via the script frame parameter.
However in the script, a command beacon (=B1) runs the TX once regardless of the frame
configuration of the concerned mode.

73 Patrick F4GCB

Hello Geir, In the TX136/500 manual v1.08, the serial set commands which are listed in the « Serial protocol: TX136/500 » column can be used to create a script. The default script in eeprom is "=G1=D3=B1=ZT10" that means : =G1 mode QRSS =D3 dot time to 3 s =B1 run the beacon =ZT10 10 s wai...

And as usual for our Japanese friends, here is the version 1.08j which limits the RF power according to the portable regulation in Japan.

73, Patrick F4GCB

Hello the TX136/500 builders, This new unofficial version 1.08 gives the following changes :
 - CW identity option added : 12 or 24 wpm to accord with licensing conditions
 - Script mode added : the serial control commands can be recorded and played to have a TX136/500 automation so as to create a d...

Hello Geir,

Thank you for yours comments.

I am working on the next version (1.08).
The CW identification has been added as an option and I consider yours other suggestions

73
Patrick F4GCB

For our Japanese friends, here is the version 1.07j which limits the RF power
according to the portable regulation in Japan.

73, Patrick F4GCB

Hello the TX136/500 builders, This new unofficial version 1.07 gives the following changes : - OPERA mode added : OP2 to OP65 (see https://rosmodem.wordpress.com/ ) - JASON mode added : normal and fast speed with turbo mode (see http://www.weaksignals.com/ ) - beacon configuration menu added to prog...

Hello Steve

Don’t worry. The 1.06 release adds WSPR mode but doesn’t remove old modes.
In the Configuration page (long push display/config button) the Mode menu permits
to choose between the following modes: CW, QRSS, DFCW, WSPR-2 and WSPR-15.
Enjoy with WSPR.

73
Patrick F4GCB

Hi Mori,

Many thanks to report me the problems that you found.

The bugs will be fixed with the next version which should be released,
I hope, some time in January with new features.

73, Patrick F4GCB