Search found 22 matches

Return to advanced search

Re: JUMA 100D with LDG AT-100 ProII

Hi Adrian

I will give it a try and let you know how I go.

The biggest problem seems to be that the Auto tuner retunes with changing power.
I may have to just run it in Manual mode if the power averaging needs too high a level :(

Kind Regards

73s

Greg VK4GRM
by VK4GRM
14 Jan 2019 10:27
 
Forum: Juma Firmware by 5B4AIY
Topic: JUMA 100D with LDG AT-100 ProII
Replies: 2
Views: 10118

JUMA 100D with LDG AT-100 ProII

Hi Adrian I have been trying to use my Juma 100D with a LDG AT-100 ProII Antenna Tuner without much success to date. :cry: It would appear that the Juma 100D VSWR trip is instantaneous once the SWR level is exceeded. What is appearing to happen is that when the AT-100 ProII Antenna Tuner goes throug...
by VK4GRM
13 Jan 2019 01:58
 
Forum: Juma Firmware by 5B4AIY
Topic: JUMA 100D with LDG AT-100 ProII
Replies: 2
Views: 10118

Re: JUMA 100D Firmware Update

Thanks Adrian

I did notice that there was quite a range where the displayed value did not change. Your approach of taking the average provides a good way of getting the best result.

I will do another frequency calibration tonight.

Thanks again


73s

Greg

VK4GRM
by VK4GRM
04 Dec 2018 08:39
 
Forum: Juma Firmware by 5B4AIY
Topic: JUMA 100D Firmware Update
Replies: 14
Views: 28421

Re: JUMA PA100D Build Log

Hi Peter I have just successfully updated the software on my PA100D. If you intend to try I suggest you have a read of my posts on Adrian's part of the Forum. Adrian has been a great help in getting this sorted for me as a ran into a few problems. I have included some details to help with getting it...
by VK4GRM
02 Dec 2018 10:02
 
Forum: Juma Discussion
Topic: JUMA PA100-D Build Log
Replies: 9
Views: 9450

Re: JUMA 100D Firmware Update

Hi Adrian Thanks again for your help. The software is loaded and all appears to be working correctly. I worked a few more countries on FT8 tonight!! I have calibrated the Voltage using a digital multi-meter and the Power using a spectrum analyser and home brew coupler. I have to track down a clamp o...
by VK4GRM
02 Dec 2018 09:57
 
Forum: Juma Firmware by 5B4AIY
Topic: JUMA 100D Firmware Update
Replies: 14
Views: 28421

Re: JUMA 100D Firmware Update

Hi Adrian I have successfully loaded version V3.00c of your software. The thing that was interesting was that I had to install the following dlls MFC71.dll MSVCR71.dll MSVCP71.dll to get the ingenia bootloader to run. I will now spend some more time with your manual to better understand the addition...
by VK4GRM
01 Dec 2018 11:07
 
Forum: Juma Firmware by 5B4AIY
Topic: JUMA 100D Firmware Update
Replies: 14
Views: 28421

Re: JUMA 100D Firmware Update

Hi Adrian I think I have it sorted. As you surmised the MAX232 chip was OK! :D I am not sure but I think the default port settings may have been corrupted so it was not talking or responding to commands. Alternatively and this is perhaps more likely you need to be in the TEST mode for the port to be...
by VK4GRM
01 Dec 2018 08:18
 
Forum: Juma Firmware by 5B4AIY
Topic: JUMA 100D Firmware Update
Replies: 14
Views: 28421

Re: JUMA 100D Firmware Update

Hi Adrian To answer your last post first: I conducted the loop back test you suggested, just connected the ring and the tip together and was able to observe data being echoes back to the terminal program. I ran "the quick brown fox" to see a string of data. I have downloaded Termite and am...
by VK4GRM
29 Nov 2018 11:18
 
Forum: Juma Firmware by 5B4AIY
Topic: JUMA 100D Firmware Update
Replies: 14
Views: 28421

Re: JUMA 100D Firmware Update

Hi Adrian Another update. I have checked the solder connections etc and all appear to be OK. I have checked the connections with a multi-meter and read 100 ohms between the following: DB9 Pin 2 and Pin 14 on the MAX232 DB9 Pin 3 and Pin 13 on the MAX232 This is consistent with the 100 ohm resistors ...
by VK4GRM
28 Nov 2018 10:38
 
Forum: Juma Firmware by 5B4AIY
Topic: JUMA 100D Firmware Update
Replies: 14
Views: 28421

Re: JUMA 100D Firmware Update

Hi Adrian I have checked the connections and all appear to be OK. TX and RX from tip and ring have 100ohm to the relevant connections on the MAX232 chip. This is the full path so I assume that the connections are good all the way through. Pin 11 and 12 of the MAX232 to 41 and 42 of the PIC are zero ...
by VK4GRM
26 Nov 2018 12:23
 
Forum: Juma Firmware by 5B4AIY
Topic: JUMA 100D Firmware Update
Replies: 14
Views: 28421
Next

Return to advanced search