Search found 8 matches

Return to advanced search

Re: TX136/500 V1.08 CWID and Script mode added

Hello Patric, I saw it here: "However in the script, a command beacon (=B1) runs the TX once regardless of the frame" But I understand now that I misunderstood that statement. So the correct way seeing this is, if I set the script to run indefinitely, it will, but each command within that ...
by LA6LU
29 May 2016 21:37
 
Forum: Juma Discussion
Topic: TX136/500 V1.08 CWID and Script mode added
Replies: 19
Views: 15993

Re: TX136/500 V1.08 CWID and Script mode added

Hello Geir, Just to answer your question. The script can be looped continuously or n times (1 to 99) via the script frame parameter. However in the script, a command beacon (=B1) runs the TX once regardless of the frame configuration of the concerned mode. 73 Patrick F4GCB Hello Patrick, Could this...
by LA6LU
29 May 2016 14:07
 
Forum: Juma Discussion
Topic: TX136/500 V1.08 CWID and Script mode added
Replies: 19
Views: 15993

Re: TX136/500 V1.08 CWID and Script mode added

Hello Mori,

Yes, that is correct. There is only 6 digit locator support in WSPR-15, not in WSPR-2.
I have missed this too, but that is how the WSPR protocol is defined.

73 from
Geir, LA6LU
by LA6LU
29 May 2016 13:37
 
Forum: Juma Discussion
Topic: TX136/500 V1.08 CWID and Script mode added
Replies: 19
Views: 15993

Re: TX136/500 V1.08 CWID and Script mode added

Hello Patrick. Great and thanks for the reply and info. I Just found the serial protocol document now and will have a look at it very soon as I am working with my Juma right now. The plan was to put the Juma on air with alternating WSPR & CW beacon modes at Monday. But if alternating is not poss...
by LA6LU
26 May 2016 17:51
 
Forum: Juma Discussion
Topic: TX136/500 V1.08 CWID and Script mode added
Replies: 19
Views: 15993

Re: TX136/500 V1.08 CWID and Script mode added

Hello Patric, I have successfully flashed my TX500 with ver 1.08. I am interested in running CW beacon mode combined with WSPR mode. I hope this is possible to do, eventually with scripts. Are there any additional documentation on how to enter a working script and what those symbols actually means? ...
by LA6LU
25 May 2016 18:33
 
Forum: Juma Discussion
Topic: TX136/500 V1.08 CWID and Script mode added
Replies: 19
Views: 15993

Re: TX136/500 V1.08 CWID and Script mode added

Hi again Mori,

" I am not 100% sure, but the current firmware ver. 1.08 (probably) does not support the WSPR-15 mode."


I was wrong, WSPR-15 was supported from ver, 1.06. Sorry about that.
So you need to go for WSPR-15 if you want 6 character grids.

73 from
Geir, LA6LU
by LA6LU
24 May 2016 12:40
 
Forum: Juma Discussion
Topic: TX136/500 V1.08 CWID and Script mode added
Replies: 19
Views: 15993

Re: TX136/500 V1.08 CWID and Script mode added

I strongly hope the software that allows sending a six-digit Grid in WSPR mode. Error in the four-digit Grid on WSPR Map is too large. Many of Japan's LF band enthusiasts will operate in the field by the housing situation. Since the location to operate changes frequently must be sent in 6-digit Gri...
by LA6LU
24 May 2016 11:49
 
Forum: Juma Discussion
Topic: TX136/500 V1.08 CWID and Script mode added
Replies: 19
Views: 15993

Re: TX136/500 v1.07 OPERA and JASON modes added

Hello, Since I am new to this, I have to just assume things. I am aware that there a good chance that things can be done (or not), that's not so obvious, so here are my questions and a few assumptions. I am soon going to flash my Juma TX500 with the latest firmware from Patric. However, before I do ...
by LA6LU
03 Apr 2016 20:30
 
Forum: Juma Discussion
Topic: TX136/500 v1.07 OPERA and JASON modes added
Replies: 11
Views: 14499

Return to advanced search

cron